PRODUCTS
Accessory Interface Boards
GR-PCI-CAN
Accessory board connecting to the PIO expansion connector and providing two CAN bus interfaces.
Can be provided with either PCI or CPCI front panel. Please specify when ordering.
GR-PCI-RS232 / GR-PCI-RS422 / GR-PCI-LVDS
Accessory board for GR-PCI-XC5V connecting to the PIO expansion connector and providing two serial interfaces (2 x 4 signals). The serial interfaces can either be 2 x RS232, 2 x RS422 or 2 x LVDS interfaces.
GR-CPCI-RS232 / GR-CPCI-RS422 / GR-CPCI-LVDS
Accessory board for Compact PCI format board. Same as GR-PCI-RS232, but with compact PCI front plate for installation in a Compact PCI rack, adjacent to GR-CPCI board.
Mezzanine Boards
GR-CPCI-SER2-SPW4
Mezzanine board which provides two RS232 serial interfaces and four LVDS interfces with Spacewire connections.
GR-CPCI-1553
Mezzanine board for GR-CPCI-XC4V board, providing 4Mbyte SRAM, dual CAN interface, dual MIL-STD-1553 interface, 3 Spacewire Interfaces and headers for General Purpose I/O connections.
GR-RTAX-MEZZ
Mezzanine board for GR-CPCI-AX2000 board, providing one CAN interface, dual MIL-STD-1553 interface, 3 Spacewire Interfaces, one channel ADC (12bit), one channel DAC (12 bit) and headers for General Purpose I/O connections.
GR-CPCI-PCI Compact PCI to PCI format adapter
Adapter board allowing a 32/64bit 3U format compact PCI card to be installed in a 'classic' PCI slot.
GR-CPCI-SRAM-8M
Mezzanine board for GR-CPCI board, providing 8Mbyte SRAM. This allows SRAM to be used in addition to, or instead of SDRAM.
GR-CPCI-TEST
Mezzanine board for GR-CPCI board, connecting to user expansion connectors. This provides standard 0.1" header connectors for easy hook-up to the general purpose I/O signals or for logic analyser/test connections
Other Accessories
Digilent HS-1 JTAG Programming Cable
The JTAG-HS1 programming cable is a USB high-speed programming solution for Xilinx FPGAs, compatible with all Xilinx tools, including iMPACT, Chipscope, and EDK.
For current Development boards: BACK TO BOARDS